Tokuyama Palfique LX5 Syringe Refill

• Outstanding Polishability
• High Gloss Retention Over Time
• Wide Shade Matching Range (Chameleon Effect)
• High Wear Resistance
• Minimal Wear to Opposing Teeth
• Low Shrinkage
• Good Radiopacity
• RAP Technology for Shortened Curing Time
• Versatile Indications: Suitable for anterior and posterior restorations, veneers, diastema closure, and repair of porcelain/composite.
• Advanced Filler Composition: 82% silica-zirconia filler, reducing polymerization shrinkag

Introducing the next generation ESTELITE Sigma Quick…
PALFIQUE LX5. Delivering lifelike aesthetic restorations,infused with our Supra-Nano spherical fillers, that was engineered by Tokuyama Dental.

Tokuyama Dental’s composite resin is recognized world-wide, and features outstanding polishabillity, wide shade matching range and high wear resistance.

PALFIQUE LX5 can meet everything in your practice.

Palfique LX5 Syringe Refill is an advanced light-cured composite resin designed for anterior and posterior restorations, suitable for all carious classes. Comprising 82% by weight (71% by volume) of silica-zirconia filler and composite filler, it exhibits decreased polymerization shrinkage due to its high filler load. The inorganic filler, featuring spherical submicron particles (mean size: 0.2μm), ensures exceptional gloss retention and wear resistance. The monomer matrix contains Bis-GMA and Triethylene glycol dimethacrylate. Incorporating Radical-Amplified Photo polymerization initiator technology (RAP technology), PALFIQUE LX5 offers a one-third reduction in curing time compared to conventional resin composites, facilitated by a light curing unit with a wavelength range of 400 to 500nm.

Indications:

• Direct anterior and posterior restorations, including occlusal surfaces, covering all carious classes.
• Direct bonded composite veneer.
• Diastema closure.
• Repair of porcelain/composite.

• Quick Curing Time: 10 sec. with halogen light (≥400mW/cm2)
• Extended Working Time: 90 sec. under ambient light (10,000 lx)
• Available in 20 shades
• Extended workig time
• Outstanding polishability
• High gloss retention over time
• Wide shade matching range (chameleon effect)
• High wear resistance
• Less wear to opposing teeth
• Low shrinkage
• Good radiopacity
• Available in 20 shades

Isolation:
Isolate the treatment area using a rubber dam or other suitable isolation methods to prevent contamination.

Tooth Preparation:
Prepare the tooth according to standard restorative procedures, removing any decay or damaged structure.

Etching and Bonding:
Etch the tooth surface with an appropriate etchant, rinse, and apply a bonding agent as per the manufacturer's instructions.

Application of PALFIQUE LX5:
Dispense the PALFIQUE LX5 from the syringe onto a mixing pad. Use an appropriate instrument for placement and shaping.

Light-Curing:
Light-cure PALFIQUE LX5 using a suitable light-curing unit. Follow the recommended curing time and ensure adequate coverage of all applied material.

Finishing and Polishing:
Once cured, finish and polish the restoration using fine finishing burs and polishing discs to achieve the desired aesthetics.

Check Occlusion:
Verify occlusion to ensure proper bite and adjust if necessary.

Clean Instruments:
Clean placement instruments with alcohol after use.

Patient Instructions:
Advise the patient to avoid chewing on hard objects immediately after the procedure.

Safety Precautions:
Adhere to safety precautions, including the use of protective eyewear when using a light-curing unit.